FUJICA GA645, 60mm F4 Fujinon, multicoated, manual or autoexposure, manual or autofocus, built-in pop-up flash, lenscap, accepts both 120/220 films, will imprint data (date down to the minute, shutter speed and F-stop) on film edge. Helical focusing mount; no bellows to go bad! Mint, $675
FUJICA GS645W, 45mm F5.6 Fujinon-W, multicoated, built-in lightmeter, accepts both 120/220 films. helical focusing mount; no bellows to go bad! Mint-, with case, cap, instruction book, $720
FUJICA GS645, FUJINON S 75mm F3.4, multicoated, built-in lightmeter, folding camera--very compact, no longer available new, neckstrap, accepts both 120/220 films, this one still has the protective plastic on the base, pinholes in bellows, othewise Mint-, $475
Vintage Mamiya 6, compact folding 6X6cm RF, 75mm F3.5 Zuiko, coated, shutter speeds, B, 1 second to 1/500 second, unique camera, focusing the camera moves the film plane while the lens is fixed, automatic film advance and film counter, red window too, case with accessory pouch on strap, yellow filter, newly cleaned, lubed, and adjusted, ca 1940-1950's, Ex, $180
Plaubel Makina IIIR brochure, ~12 pages, copy, $20
Plaubel rollholders, Makina IIIR vintage, 6X6, VG, $100 each, 6X9, Mint-, $300 each, 35mm, Mint-, $300, Ex, $150
Plaubel Makina (vintage 1955 and earlier) automatic rollholder instruction booklet copy, $10
Plaubel Makina slipover viewfinder for 100mm lens, with frame for 6X6cm, Makina IIIR vintage, Ex-, $25
Plaubel Makina slipover viewfinder for 190mm lens, with frameline for 6X6cm, Makina IIIR vintage, Mint, $40
Plaubel Makina slipover viewfinder for 190mm lens, with framelines for 6X9 and 35mm, Makina IIIR vintage, Ex+, $60
Plaubel Makina slipover optical viewfinder for 73mm lens, with frameline for 6X9cm, Makina IIIR vintage, Mint-, $85, only the black crinkle paint finish one is still available.
Plaubel Makina IIIR PC synch adaptor, plugs into the brown phenolic 3 hole synch fitting on front of camera, Mint, $60
Plaubel Makina #2 yellow filter to fit all 3 Makina lenses and the Plaubel lens shade (from 1950's and earlier), filter only, clean glass, $60
Plaubel Makina IIIR vintage lenscaps, to fit Plaubel lenses of about 45mm outside diameter, matt Aluminum with Plaubel logo and felt lining, Ex+, $30 each, 2 available
Plaubel Makina IIIR vintage 3 C-cell barebulb flashgun, labeled "Plaubel, Frankfurt a. M.", Mint-, $75
Optical brightline viewfinder, 58mm for 6X7cm, Koni-Omega, revolves for horizontal format or vertical format, large, bright, lines for infinity and close focus, with case, with parallax correction to 1 meter, virtually perfect, $150. The design of this viewfinder is about as good as it gets.
65mm finder for 6X9cm. Mamiya Super 23 finder. BIG BRIGHT VIEWFINDER! No lines to obstruct your vision. Parallax corrected in both meters and feet to 1.5 meters or 5 feet. Fits in the flash shoe of your camera. It has a shoe on top of it for your strobe or other accessory. Clean! Glass perfect. May also be used as a 35mm VF for a 35mm camera. $175.
Viewfinders are proportionally specific, not format specific, that is, a 24X36mm viewfinder may be used with a 6X9cm camera because the proportions of the 2 formats are the same. Additional viewfinders on my 35mm and Digital Camera equipment web page.
Zeiss Super Ikonta B case, no strap, a little wear around edges, otherwise Ex, $20
PENTAX 67 BODY & PRISM, non mirror lockup, prism fits tightly--the foam seal on the prism is intact and in good condition, about a thumbnail's worth of brassing on base, Ex/Ex+ body, small dent in prism, $550
PENTAX 67 BODY, mirrorlockup, about an inch of brassing at edge of lower right base, with TTL PENTA PRISM finder, 2 small dings in prism, about 1/2inch of brassing along top edge, Ex+, $800
45mm F4 Takumar, multicoated, caps, rectangular lensshade, Mint, just put on list, got to research $500
55mm F3.5 Takumar, multicoated, caps, case, Mint, just put on list, got to research $430
75mm F4.5 Takumar, multicoated, caps, case, Mint, just put on list, got to research $350
90mm F2.8 Takumar, multicoated, with shutter, rear cap, Ex+, $350
165mm F4 Takumar, multicoated, with shutter, Pentax UV filter, caps, original box, Mint, just put on list, got to research $450
Set of 3 extension tubes, Mint, $300. These could also be useful in adapting a lens to the Pentax 67.
Adaptor, Pentax 6X7 mount camera body to Sinar, custom, Ex, $200
HASSELBLAD SWC, '67 body, 38mm Biogon, w/finder, newly cleaned, lubed and adjusted, Mint-, ever so close to mint, with A12 back, $2000.
HASSELBLAD SUPER WIDE, '56 body with 12 exposure rollback, w/o lens or focusing mount or shutter or viewfinder, knob advance only, accepts old style cable release only, shutter release below lens, bubble level on top, 1/4-20 TPI tripod socket only, Mint-, $500 Note: the lens was mounted onto a Sinar Handy which you will find on my Sinar list. The lens and focusing mount may be put back on the camera, but the viewfinder is permanently altered to show a round image. The lens remounted back on the SWC body is available w/o the viewfinder for $1600.
HASSELBLAD 63MM POLARIZER for SWC, Ex, $200
HASSELBLAD 500C '61 body, folding focusing hood, plain focusing screen, extremely slight wear on light trap, otherwise Mint-, $400
HASSELBLAD 500C/M '84 body, folding focusing hood, plain focusing screen, extremely slight wear on light trap, otherwise Mint, $550. Illustrated with the lens and back listed separately below. Take 20% off if purchased altogether.
HASSELBLAD 500C/M '74 black body, matching black folding focusing hood with scratch in magnifying lens, plain focusing screen, moderate wear on light trap, otherwise Ex+, $450
HASSELBLAD 500EL '69 body, plain focusing screen, charger, battery, 50' electric release on windup reel, slight wear on light trap, otherwise Mint, $400 or $350 w/o electric release
Hasselblad 500EL standard battery charger, Ex, $35
HASSELBLAD 14 HOUR CHARGER, for one or two batteries, with timer, also serves as battery eliminator/AC adaptor, Ex+, $125, available only with the 500EL listed above
HASSELBLAD 80MM F2.8, black T*, Mint-, $550. Illustrated above with '84 C/M body.
HASSELBLAD 80MM F2.8, chrome, Mint, $400
HASSELBLAD 120MM F5.6 S-PLANAR, chrome, bayonet case for lens, VG 120150 lensshade, 4 Hasselblad bayonet filters (Red, 6X, Green, 1.5X, Yellow, 1.5X, and Yellow-Green, 1.5X), newly cleaned, lubed, and adjusted shutter, Ex+, $1000 Note: these items are packaged together because they work so well together and because they are not nearly so useful to me indivudually.
HASSELBLAD A12 ROLLBACK, chrome, Mint-, $300
HASSELBLAD A12 ROLLBACK, all black, chipped paint around corners, perfect mechanically, boxed, Ex+, $300
HASSELBLAD 12 ROLLBACK, chrome, with non matching (serial numbers are different, but they match cosmetically and work smoothly together) insert, Mint-, $250
HASSELBLAD 12 ROLLBACK, chrome, Ex+, $250
HASSELBLAD 12 exposure back, Mint-, $250
HASSELBLAD A24 exposure back, chrome, Mint, $450
HASSELBLAD 70MM BACK, newly CLA'ed, matchhead size mark on top ID plate, otherwise Mint, with 2 new Hasselblad cassettes in boxes, 2 used cassettes in Mint condition, $250.
Hasselblad sheet film back with two sheet film holders, one of the holders has a bad scratch that does not affect the operation, otherwise extremely clean, $130.
Hasselblad ground glass back with Fresnel, with box. Accepts folding focusing hood, NC-2, etc. Very useful with the SCC. Mint-, $150 with the above or below items.
Hasselblad digital or film adapter carrier frame. This is a partially completed Hasselblad adapter. It could be used as a rear carrier frame for a view camera such as the Plaubel Peco Jr. or some other small format view camera. The back side has 2 light trap ridges to mate with the corresponding depressions on the film back. Connecting hardware will need to be added to hold the back on the camera. It will need to be black anodized, maybe even flocked on the front side. Many of the earlier megapixel backs were designed to fit the Hasselblad and can be had for very reasonable prices. The Hasselblad is still just a box cameras, however. Mount this carrier frame on a view camera rear standard and you will have something. You cannot take a box camera image and transform it using Photoshop without losing quality. You have to make your camera adjustments in the camera to achieve professional results. A lot of work went into machining this. It is a bargain @ $400
Hasselblad folding focusing hood, Mint-, $50
Hasselblad NC2 prism, with rubber eyeglass ring, perfect glass, no dings or dents, some slight scratches in paint, EX/EX+, $275
Note: If you've been considering a Kiev prism instead of an NC2, I suggest you reconsider. The Kiev prism is a loose fit. It rattles and can easily slip out when removing a film magazine.
Hasselblad NC2 prism, with rubber eyeglass ring, perfect glass, no dings or dents, some slight brassing and scratches in paint, Ex+, $300
HASSELBLAD QUICK RELEASE TRIPOD ADAPTER, works with all Hasselblads, 1/4 & 3/8" tripod sockets on bottom, Mint, $65
HASSELBLAD PROXAR 1, f=1m, Mint, $80
HASSELBLAD series 8 or 63mm filter, light yellow, 1.5X, Mint-, $20
HASSELBLAD bayonet filters, Red, 6X, Green, 1.5X, Yellow, 1.5X, and Yellow-Green, 1.5X, fit 80mm F2.8, 120mm F5.6 Planar, etc., Ex+, $20 each, 4 for $75
HASSELBLAD 500CM FLASH GUN BRACKET, #45073, built-in trigger release & lock, swrist strap, Mint, $160
HASSELBLAD PISTOL GRIP, built-in trigger release, Mint, $80
HASSELBLAD BELLOWS w/shade, mask, slide copier, double cable release, instructions, Mint, $600. The first 7 images show what is included. The 8th image shows the bellows in use as a slide copy setup with a 500C camera body, back, folding focusing hood and 80mm lens, all of which are available separately, none of which are included.
HASSELBLAD/SINAR/MP4: Hasselblad camera mount on rear of MP4 focusing bellows, Sinar carrier frame on front of focusing bellows. Designed for use with a Hasselblad 500 EL with a 21mm extension tube. Camera base slips into quickrelease mount and extension tube slips into machined plate at top of bellows assembly. Hasselblad is in perfect alignment when bellows assembly is in center detent position; it is possible to swivel whole camera/bellows assembly off center. Large MP4 bellows mean there will be no problem with image degrading light bouncing off the bellows. Designed for use with your view camera lenses on Sinar boards. See COPY CAMERA LIST.
HASSELBLAD 516 CASE, 5.25X16.75X20.875", for 500C, SWC, bellows, lenses, etc. Interior in beautiful condition, exterior fine except for rusty hardware, $200 Note: camera equipment not included.
HASSELBLAD 518 CASE, 8X10X14", 3 metal plates on interior for mounting bodies, 5 leather straps inside for holding backs and lenses, side slot for extra darkslide, w/exterior pouch, top handle & shoulder strap, locks, but no keys, $80
HASSELBLAD regular advance knob, Mint, $20
HASSELBLAD side mount 80mm sportsfinder, boxed, Mint, $35
HASSELBLAD narrow strap, Ex+, $20
Polarizing filter, bayonet 50, Japan, Ex+, $25
Tiffen bayonet 50(?) for Hasselblad #820 to series 8 adapter, Ex, $50
Tiffen black anodized Alumnum series 8 (67mm) square with rounded corners lensshade, normal to long lenses, Ex+, $30, 2 available
Aluminum series 8 (~67mm) square with rounded corners lensshade, normal to long lenses, Ex+, $30, 2 available
Hasselblad 2.8/50 lensshade, ~86mm threads, new-in-box, $50
Hasselblad 93/50 filter adaptor, for 2.8/50 lens, ~86mm threads rear, accepts 93mm filter, ~95mm threads front, new, $50
"Hasselblad Superwide C" instruction book, about 30 pages, Ex, $50
"Hasselblad 500C/M, 500EL/M and SWC/M" instruction book , about 32 pages, Ex+, $50
"Hasselblad 200FC" instruction book, about 25 pages, with several inserts, Ex+, $50
"Hasselblad Bellows" instruction book copy (original stays with the above bellows), $10
"Hasselblad Roll Film Magazine 12, 16 and 16S" instruction book, Ex, $5
"Hasselblad Quick Winding Crank" (for film magazine) instruction book, Ex, $5
"Hasselblad 500C, 500EL and SWC" product catalog, about 40 pages, Ex+, $30
"Hasselblad 500C and SWC" product catalog, about 25 pages, Ex+, $20
"Hasselblad 500C and SWC" product catalog, about 32 pages, Ex+, $25
"Hasselblad 500C and SWC" product catalog, about 15 pages, Ex+, $15
"THE HASSELBLAD MANUAL" signed by Ernst Wildi, 2nd edition, 1982, w
complete set of extension tubes including C-A adaptor, C-B adaptor, C-C adaptor and C-D adaptor, Mint-, $200
ROLLEIFLEX FRONT SURFACE MIRROR. A customer sent me his Rollei for cleaning, lubing and adjusting. The primary complaint was that the shutter was tired and sticky. I had that work done and looked oved the camera as well. The customer did not even know that his viewing lens mirror was in such deteriorated condition. I photographed the original mirror in the camera. After installing a new mirror, I could no longer focus on the perfect mirror that only reflected light, but instead focused on the ground glass focusing screen. I had to cut down the strobe power by 1 1/3 stops to get the right exposure; that is how much light the deteriorated mirror was losing. I have additional mirrors in stock ready to ship to you for your installation @ $50, or I will install for you @ $100 including an internal cleaning of the upper chamber of your camera and I will also look over your camera as a whole and suggest any other work that may need to be done. I can also supply mirrors for other cameras. I have a mirror in stock for a 4X5 Super D Graflex SLR. I can custom cut mirrors for you. The mirrors in the photo appear blue because there is a protective covering on them; on top of the pile of new mirrors is the original deteriorated mirror. I cannot guarantee that the mirrors that I have in stock will fit your particular camera unless I install them as different models of cameras may have different mirrors.
ROLLEI FLASHGUN, retractable synch cord, Ex+, case worn, $50
ROLLEI FLASHGUN, coiled synch cord, adjustable angle flash, case. There is something rolling around loose inside flash head, otherwise it is Mint. $50
ROLLEI BAY 1 lensshade, case, room for 2 filters in case, case designed to mount on neckstrap, a little brassing on front edge, not at all bent, Ex+/Mint-, $55
ROLLEI BAY 1 case for filter, case designed to mount on neckstrap, $10
ROLLEI LIGHT METER DIFFUSER for incident light readings. Rare because it is easily lost. $10.
MAMIYA C330 65mm viewfinder accessory lens, Ex, $35
ROLLEI CASE DIVIDERS AND FILTER HOLDERS. These case in with a modern Rollei SLR case. $30.
ROLLEI R1.5 Bayonet VI slight warming filter, for Rollei SLR's, bayonet mount damaged on front side, still works, otherwise Ex, glass clean, $10
ROLLEI SYNC CORD. Bare wires at one end. $10.
Panoramic panhead, for segmented panoramics, has 6 click stops @ 60 degree intervals, 1/4-20 threads top and bottom, Delrin with metal camera stud, suitable for making segmented panoramics with 55mm lenses on 6X7cm, 65mm lenses on 6X9cm, 28mm lenses on 35mm, and other combinations in other formats, 1.2" tall, 2.64" diameter, 4 ounces, Mint, $125 Note: custom panheads also available. Want one with 4, 5, 7, 8, or any other # of click stops, 3/8-16 threads top and/or bottom, larger diameter--no problem. Illustrated is a 5 position panhead on a Dietzgen tripod (found on tripod list). So why would you want such an item? Because you can do panoramics with ease and precision. You could do the same thing with a degree marked pan head, but you would have to unlock the pan movment, walk around the tripod, visually set the camera position and relock the pan movement each time. With this panhead, you merely turn the camera to the next click stop and shoot. Foolproof! You can print the images and mount them side-by-side with space in between the images; this method results in no distortion. This method is much like looking out from a gazebo. The alternative is to shoot more images with a lot of overlap and stitch the images together in an image editing program; this result is much like shooting with a swinging lens camera or a rotating camera. You get distortion, but no space between images. Presently I have in stock pan heads with 4, 5, 6, 8, and 10 click stops. Although I could make a pan head with a large number of click stops that would give you several options, I do not recommend it because it would no longer be foolproof. The series of images below were made with a 55mm lens on a 6X7cm camera with a 6 position panhead.
with 58mm F5.6 Konica Hexanon lens in modern all black Copal shutter mounted on lenscone with 6X9cm Grafic rollholder and Konica optical VF. the most compact camera possible; the rear of the body is smaller than the rollback, tapering from the rectangular rollback to the circular shutter. Focused at the Hyperfocal distance of 15', the image is in focus from 4' to infinity @ F22, 2' to infinity @ F45. Lens is very soft at larger apertures and very sharp at smaller apertures, moderately sharp inbetween; where else can you find a soft focus wideangle lens. An excellent segmented panoramic camera--5 images gives you 360 degrees. Vignettes slightly at corners. Weighs only 2#! Lens and VF are Mint-, body is Ex+, $600